22


TB020  HYDRA-II SUPPORT SOFTWARE TAPE RELEASE (B)
 
                 J.D.S. MICROPROCESSING TECHNICAL BULLETIN
 ------------------------------------------------------------------------
 DATE WRITTEN:  08/08/91                    SUBMITTED BY:  R. SANDE
     SEQUENCE:  1 OF 1                            FILEID: TB020 BULLETIN
 ------------------------------------------------------------------------
              HYDRA-II SUPPORT SOFTWARE TAPE RELEASE (B)
              ==========================================

 * THE FORMAT OF THIS TAPE IS:
 *
 * FILE 0  -  INSTRUCTION FILE.
 *            80 X 80 LIST OF THESE INSTRUCTIONS.
 *
 * FILE 1  -  CMS FORMAT - CONTAINS ALL REQUIRED MEMBERS FOR
 *            CMS USERS.
 *
 *            THIS FILE WAS CREATED USING THE 'VMFPLC2 DUMP' FUNCTION
 *            FOR THE FOLLOWING MEMBERS:
 *
 *            THE TAPE CAN BE USED WITH THE COMMANDS PROVIDED BELOW.
 *            (CUU REPRESENTS THE REAL CHANNEL ADDRESS OF THE TAPE DRIVE
 *            TAPE FSF
 *            CP ATT CUU * 181
 *            VMFPLC2 LOAD * *
 *
 *               HYDRAUTL ASSEMBLE  -  (HYDRAUTL SOURCE PROGRAM)
 *               HYDRAUTL MODULE    -  (HYDRAUTL EXECUTABLE)
 *               HYDRAUTL TEXT      -  (HYDRAUTL OBJECT MODULE)
 *               HYDRA    TDF5      -  (TERMINAL DEFINITIONS FOR HYDRA
 *                                     V=5,V=6,V=8,V=9  (4-CHAR FORMAT))
 *               HYDRA    TDF4      -  (TERMINAL DEFINITIONS FOR
 *                                     HYDRA V=1 TO V=4 (1-CHAR FORMAT))
 *               HYDRAORG 4PT       -  (HYDRA ORIGINAL FACTORY CONFIG
 *                                     FOR 4 PORT SYSTEMS - V=8 & V=9)
 *               HYDRAORG 8PT       -  (HYDRA ORIGINAL FACTORY CONFIG
 *                                     FOR 8 PORT SYSTEMS - V=8 & V=9)
 *               HYDRAORG 16PT      -  (HYDRA ORIGINAL FACTORY CONFIG
 *                                     FOR 16,32,64 PORT SYSTEMS - V=8
 *                                     AND V=9)
 *               HY100    ASSEMBLE  -  (HY100 SUBROUTINE SOURCE)
 *               HY100    TEXT      -  (HY100 OBJECT MODULE)
 *               HYMAP    COPY      -  (HYMAP COPY BOOK FOR HY100)
 *               HYDRA    KEYMAP    -  (KEYBOARD MAPS AVAILABLE
 *                                     FOR STANDARD TDF'S)
 *
 * FILE 2  -  VSE FORMAT - CONTAINS ALL REQUIRED MEMBERS FOR
 *            VSE USERS BLOCKED 80 X 12000 (150 RECORDS PER BLOCK).
 *            USE DITTO FOR REBLOCKING : TTR,CUU,CUU,80,1
 *            WHERE CUU REPRESENTS THE ADDRESSES OF THE 2 TAPE DRIVES
 *
 *            AFTER REBLOCKING, THE JCL BELOW CATALOGS THE
 *            MEMBERS. NOTE: DIFFERENT JCL'S ARE REQUIRED FOR VSE/SP &
 *            DOS/VSE SYSTEMS.
 *            (CUU REPRESENTS THE CHANNEL ADDRESS OF THE TAPE DRIVE)
 *            (LIBRARY REPRESENTS THE DOS/VSE LIBRARY NAME)
 *            (LIB & SUBLIB REPRESENT THE VSE/SP LIBRARY & SUB-LIBRARY)
 *
 *            (DOS/VSE FORMAT:)
 *   // JOB CATUTIL
 *   // ASSGN SYSIPT,CUU
 *   // LIBDEF SL,TO=LIBRARY
 *   // LIBDEF RL,TO=LIBRARY
 *   // EXEC MAINT
 *   /&
 *
 *            (VSE/SP FORMAT:)
 *   // JOB CATUTIL
 *   // ASSGN SYSIPT,CUU
 *   // EXEC LIBR,PARM='ACCESS SUBLIB=LIB.SUBLIB'
 *   /&
 *
 *            THE FOLLOWING MEMBERS WILL BE CATALOGED:
 *            SOURCE:
 *
 *               A.HYDRAUTL         -  (HYDRAUTL SOURCE PROGRAM)
 *               D.HYDRAV5          -  (TERMINAL DEFINITIONS FOR HYDRA
 *                                     V=5,V=6,V=8,V=9  (4-CHAR FORMAT))
 *               D.HYDRAV4          -  (TERMINAL DEFINITIONS FOR
 *                                     HYDRA V=1 TO V=4 (1-CHAR FORMAT))
 *               D.HYORG4           -  (HYDRA ORIGINAL FACTORY CONFIG
 *                                     FOR 4 PORT SYSTEMS - V=8 & V=9)
 *               D.HYORG8           -  (HYDRA ORIGINAL FACTORY CONFIG
 *                                     FOR 8 PORT SYSTEMS - V=8 & V=9)
 *               D.HYORG16          -  (HYDRA ORIGINAL FACTORY CONFIG
 *                                     FOR 16,32,64 PORT SYSTEMS - V=8
 *                                     AND V=9)
 *               A.HY100            -  (HY100 SUBROUTINE SOURCE)
 *               A.HYMAP            -  (HYMAP COPY BOOK FOR HY100)
 *               D.HYKEYMAP         -  (KEYBOARD MAPS AVAILABLE
 *                                     FOR STANDARD TDF'S)
 *
 *            RELO:
 *               HYDRAUTL           -  (HYDRAUTL OBJECT MODULE)
 *
 * FILE 3  -  OS/MVS FORMAT - CONTAINS ALL REQUIRED MEMBERS FOR
 *            OS/MVS USERS BLOCKED 80 X 12000 (150 RECORDS PER BLOCK)
 *
 *            THE JCL BELOW CATALOGS THE MEMBERS TO A LIBRARY.
 *            (LIBRARY REPRESENTS THE DATA SET NAME FOR HYDRA FILES)
 *            (VOL=SER=PACK REPRESENTS THE VOLID OF THE LIBRARY'S DASD)
 *
 *     //GETUTIL  JOB
 *     //S1       EXEC PGM=IEBUPDTE,PARM=NEW
 *     //SYSPRINT DD SYSOUT=A
 *     //SYSIN    DD DSN=FILE4,DISP=(OLD,KEEP),
 *     //            UNIT=TAPE,
 *     //            VOL=SER=HYDRA1,LABEL=(4,NL),
 *     //            DCB=(LRECL=80,BLKSIZE=12000,RECFM=FB)
 *     //SYSUT2   DD DSN=LIBRARY
 *     //            UNIT=SYSDA,VOL=SER=PACK,
 *     //            SPACE=(TRK,(15,15,5)),
 *     //            DISP=(NEW,CATLG,DELETE),
 *     //            DCB=(LRECL=80,BLKSIZE=6160,RECFM=FB,DSORG=PO)
 *
 *     THE FOLLOWING MEMBERS WILL BE CATALOGED:
 *
 *               HYDRAUTL         -  (HYDRAUTL SOURCE PROGRAM)
 *               NOTE:HYDRAUTL MUST BE ASSEMBLED BY USER
 *
 *               HYDRAV5          -  (TERMINAL DEFINITIONS FOR HYDRA
 *                                     V=5,V=6,V=8,V=9  (4-CHAR FORMAT))
 *               HYDRAV4          -  (TERMINAL DEFINITIONS FOR
 *                                     HYDRA V=1 TO V=4 (1-CHAR FORMAT))
 *               HYORG4           -  (HYDRA ORIGINAL FACTORY CONFIG
 *                                     FOR 4 PORT SYSTEMS - V=8 & V=9)
 *               HYORG8           -  (HYDRA ORIGINAL FACTORY CONFIG
 *                                     FOR 8 PORT SYSTEMS - V=8 & V=9)
 *               HYORG16          -  (HYDRA ORIGINAL FACTORY CONFIG
 *                                     FOR 16,32,64 PORT SYSTEMS - V=8
 *                                     AND V=9)
 *               HY100            -  (HY100 SUBROUTINE SOURCE)
 *               HYMAP            -  (HYMAP COPY BOOK FOR HY100)
 *               NOTE:HY100 MUST BE ASSEMBLED BY USER
 *
 *               HYKEYMAP         -  (KEYBOARD MAPS AVAILABLE
 *                                   FOR STANDARD TDF'S)
 *
 * FILE 4  -  FIVE TAPE MARKS.
 *
 * THE CURRENT SOFTWARE VERSIONS ON THIS TAPE ARE:
 * HY100 / HYMAP - 3.2
 * HYDRAUTL - 1.47